IDX 7505
IDX 7505
FREE SHIPPING U.S. 48
In house technical support provided for this Trinamic product.
| Datasheet | |
|---|---|
IDX_manual.pdf (643.28kB 17-Oct-13) |
|
Product Details
Description
The IDX 7505 is a small and rugged step-/ direction stepper motor driver system with a supply voltage of up to 75V and up to 5A RMS motor coil current. The parameters of the IDX 7505 like motor current and µStep resolution can be changed easily using the RS-485 interface with an ASCII protocol (e.g. with Hyperterminal). Also the firmware of the module can be updated via the serial interface. All settings are stored in an internal EEPROM, so that no bus system is required in the application. The module is fully protected and comes with a stand-alone reference search feature, using the integrated reference switch input or StallGuard™.
The motor, switches and power supply can be connected easily with screw terminal connectors. The housing is based on a thick aluminium plate which is used as a heatsink.
IDX 7505 |
|
| Interfaces: | RS485, Step / Direction |
| No. Axes: | 1 |
| Phase Current, RMS: | 5A |
| Phase Current, peak: | 7A |
| Product State: | active |
| Microstep Resolution: | 1...256 |
| Supported Motor Type: | Stepper |
| chopSync™ | |
| stallGuard™ | |
| Motor Supply: | 12...75V |
| Height: | 24mm |
| Length: | 65mm |
| Width: | 64mm |
Downloads
Application Notes |
|||
| File | Size | Modified | |
|---|---|---|---|
 |
IDX_V115.hex | 27.98kB | 17-Oct-13 |
|
IDX_V117.hex | 28.94kB | 17-Oct-13 |
 |
TMCM013Boot.exe | 486.5kB | 17-Oct-13 |
Datasheet |
|||
| File | Size | Modified | |
 |
IDX_manual.pdf | 643.28kB | 17-Oct-13 |
Documentation |
|||
| File | Size | Modified | |
|
IDX-7505_ShortSpec.pdf | 254.06kB | 17-Oct-13 |
|
IDX_manual.pdf | 643.28kB | 17-Oct-13 |
|
IDX_start.pdf | 186.23kB | 17-Oct-13 |
|
IDX_start_deutsch.pdf | 174.93kB | 17-Oct-13 |
|
tmcm_idx_kurzanleitung.pdf | 18.29kB | 17-Oct-13 |
|
tmcm_idx_short_guide.pdf | 16.21kB | 17-Oct-13 |
